HikRobot ID5000 Series - Chapter 2 Interface and Indicator; 12-Pin Interface Definitions

ID5000 Series Smart Code Reader User Manual
4
Chapter 2 Interface and Indicator
2.1 12-Pin Interface
Read the following section to get definitions of 12-pin interface.
Figure 2-1 12-Pin Interface
Table 2-1 Pin Definitions
No.
Signal
I/O Signal Source
Description
Color
1
DC-PWR
--
Direct current power supply positive
White
2
GND
--
Power supply ground
Brown
3
OPTO_OUT0
LineOut0 signal line
Opto-isolated output 0
Green
4
OPTO_OUT1
LineOut1 signal line
Opto-isolated output 1
Yellow
5
OPTO_OUT2
LineOut2 signal line
Opto-isolated output 2
Gray
6
OUT_COM
LineOut0/1/2 signal
ground
Common-ended output
Pink
7
OPTO_IN0
LineIn0 signal line
Opto-isolated input 0
Blue
8
OPTO_IN1
LineIn1 signal line
Opto-isolated input 1
Red
9
OPTO_IN2
LineIn2 signal line
Opto-isolated input 2
Black
10
IN_COM
LineIn0/1/2 signal ground
Common-ended input
Purple
11
RS232_R
--
RS232 serial port input
Red/Blue
12
RS232_T
--
RS232 serial port output
Gray/Pink