HikRobot ID5000 Series - Indicator Status

ID5000 Series Smart Code Reader User Manual
5
Note
You should refer to the table above and the label attached to the power and I/O cable to wire the
device.
2.2 Indicator Status
Read the following section to get the indicator status of the device.
Table 2-2 Description
Device Status
PWR Indicator
LNK Indicator
ACT Indicator
U1/U2
Device is
powered on.
Solid blue
Solid green
Slow/fast
flashing yellow
U1 is unlit, and
U2 is slow
flashing blue.
Power supply
exception.
Unlit
Network
exception.
Solid blue
Unlit
U1 is unlit, and
U2 is slow
flashing blue.
Device software
exception.
Solid blue
Solid green
Flashing yellow
U1 and U2 are
unlit.
Device exception
Solid blue
Solid green
Solid yellow
U1 and U2 are
solid blue.
Note
When the indicators are flashing slowly, its unlit interval is 1 s.