HikRobot ID5000 Series - Chapter 6 Client Software Layout

ID5000 Series Smart Code Reader User Manual
19
Chapter 6 Client Software Layout
After connecting to the device, the client software can read the device information and display it.
Figure 6-1 Main Window
Note
The specific interfaces of the client software may differ by its versions.
Table 6-1 Description of Main Window
No.
Name
Description
1
Menu Bar
The menu bar displays function modules, including Settings, Tool,
View, and Help.
2
Control Toolbar
The control toolbar provides quick operations for the device. You can
click different icons to start or stop batch acquisition, change window
layout, view statistics information, and device log.
3
Device
Configuration Area
You can connect or disconnect device, set parameters, and modify
device IP address in this area.
4
Live View Window
This area displays the acquisition images and algorithm reading result in
real-time. You can click different icons to capture and save image, record,
etc.
5
History Record and
Image Cache
This area displays different code information read by the device in real-
time. You can also set image cache here.