HikRobot ID5000 Series - Page 29

ID5000 Series Smart Code Reader User Manual
20
You can set device parameters in device configuration area.
Figure 6-2 Device Configuration Area
Table 6-2 Configuration Area Description
No.
Module Name
Description
1
Device Connection
You can connect or disconnect device, modify device IP
address, view device information, etc.
2
Image Settings
You can set image parameters, light parameters, etc.
3
Algorithm Settings
You can add different barcodes, set barcode number, etc.
4
I/O Control Settings
You can set parameters related with input and output.
5
Data Processing
You can set filter rule for output result.
6
Communication Settings
You can select different communication protocols, and set
related parameters for output result.
7
Configuration Management
You can save and load user parameters, and restart the device.