ID5000 Series Smart Code Reader User Manual
32
Line Out Delay Time
It sets the delay time for lighting after device outputs event source, and the unit is μs.
Line Out Ahead Time
It sets how earlier the external light starts lighting before the device outputs event source
information, and the unit is μs.
8.1.6 Set Lens Focus
The device supports setting lens focus via the client software. 2 ways are available to set lens focus,
including auto focus and manual focus.
Note
●
The lens focus function may differ by device models.
●
Setting the device mode as Test is required before setting lens focus. After completion, you can
set the device mode as Normal.
●
Setting the trigger mode as off is required before setting lens focus.
Auto Focus
Steps
1. Click in the live view window.
2. Go to Image Settings → Auto Focus, and click Execute in Focus Mode.
The device starts to adjust focus automatically.
3. Select the position parameter from Focus Position, and click Execute in Focus Position Save to
save the focus position.
4. (Optional) Select the position parameter from Focus Position, and click Execute in Focus
Position Load to load saved focus position.
Figure 8-10 Auto Focus
To Next Page
Loading...
