ID5000 Series Smart Code Reader User Manual
34
4. (Optional) Enable or disable Lighting Adapt during self-adaptive adjustment. If it is enabled, the
client software will select the best one from all lighting options during the self-adaptive adjustment.
If it is disabled, the client software will keep the lighting status before the self-adaptive adjustment.
5. (Optional) Set Gain Max or Exposure Max according to actual demands.
●
Gain Max: It is enabled in high quality mode, and it sets the max. gain during the self-adaptive
adjustment.
●
Exposure Max: It is enabled in high speed mode, and it sets the max. exposure during the self-
adaptive adjustment.
6. (Optional) You can set Adjust Timeout to set the duration of the self-adaptive adjustment, and
the adjustment will stop if the duration is exceeded. The unit of Adjust Timeout is second.
7. Click Execute in Adjust Start. The device will automatically acquire images and perform self-
adaptive adjustment, and stop acquisition after adjustment is completed.
Note
If the adjustment completed, the client software displays the spent time and prompts adjustment
succeeded. If the adjustment failed or is timeout, the client software prompts adjustment failure
or timeout.
Figure 8-12 Set Self-Adaptive Adjustment
8.1.8 Set Mirror X
The device supports the mirror X function. If this function is enabled, the image will be reversed in
a horizontal way.
Go to Image Settings, click All Features, and you can see the Mirror X.
Note
This function is enabled by default, and it may differ by device models.
To Next Page
Loading...
