ID5000 Series Smart Code Reader User Manual
15
Chapter 5 Device Connection
Device connection to the client software is required for device’s configuration and remote
operations. This section introduces how to install the client software, set PC network, connect the
device to the client software, etc.
5.1 Install Client Software
IDMVS is a client software for device configuration and remote operations.
Steps
Note
●
Check the Windows version. The client software is compatible with 32/64-bit Windows XP/7/10.
●
You can download the client software installation package from https://en.hikrobotics.com/.
●
The graphic user interface may differ by versions of client software you use.
1. Double click the installation package to start installing the client software.
2. Select the language.
3. Read and check Terms of the License Agreement.
4. Click Start Setup.
5. Select installation directory and click Next.
Figure 5-1 Installation Interface
6. Finish the installation according to the interface prompts.
To Next Page
Loading...
