HikRobot ID5000 Series - Page 61

ID5000 Series Smart Code Reader User Manual
52
You can set Rising Edge or Falling Edge as Stop Trigger In Polarity to stop trigger when selecting
physical line as IO Stop Trigger Selector.
Figure 8-33 IO Stop Trigger
When selecting Software Trigger End as IO Stop Trigger Selector, you can click Execute in
Software Stop Trigger to stop current trigger.
Figure 8-34 Software Trigger End
Serial Stop Trigger
When the specified serial port receives the specified string text, the trigger will be stopped.
Click I/O Control Settings → Stop Trigger, enable Serial Stop Trigger Enable, set Serial Stop
Trigger Text, Serial Baud Rate, Serial Data Bits, Serial parity, and Serial Stop Bits according to
actual demands.