ID5000 Series Smart Code Reader User Manual
72
It sets the FTP picture saving method when no code is read. Four methods are available, including
recently frame, all frames, range frames and specific frame. If specific frame is selected as FTP
Save Picture Strategy, you need to set FTP Picture Index.
Result Output via Other Communication Protocols
When the communication protocol is TCP Client, TCP Server, Serial, Profinet, Melsec, Ethernet/IP,
ModBus, Fins or SLMP, device mode is Normal and trigger mode is On, you can set following
parameters.
Note
ā
The configurable parameters may differ if the internal trigger mode is enabled.
ā
Here we take Profinet as Communication Protocols as an example to introduce parameters.
Regarding other communication protocols, the configurable parameters are similar with slight
difference in term of parameter names., and refer to the actual device you got for details.
Sorting Rules
It decides the output order of codes, and you can select it according to actual demands.
One By One Enable
If it is enabled, the device will send one piece of code information each time in accordance with
the specified interval. You can set the interval via One By One Interval and the default value 100
ms.
ROI Output NoRead Enable
If it is enabled, codes will be outputted in turn according to the ROI Selector of the algorithm
ROI they belong.
Local Save Picture Mode
It includes Off and NoRead. You can select NoRead to let the device save images when no code
is read.
Local Picture Type
It sets the image saving type, including JPEG and BMP.
Local Override Strategy
It includes Off, Max Count, Loop Max Count, and Reserve Space. Off means that disk will not be
overridden. Max Count means that the device will save image quantity configured in Local
Override Max. Count, and no more imaged will be saved when the disk is full. Loop Max Count
means that after the image quantity is reached the number configured in Local Override Max.
Count, the device will delete the first image and continue to save the latest image. Reserve Space
means that the device will save images when the disk is safe in terms of storage space If the
available disk space is lower than configured value, and images will be deleted.
Local Override Max. Count
You need to set this parameter when selecting Max Count or Loop Max Count as Local Override
To Next Page
Loading...
