Video Security Control Panel User Manual
Exception Detection
Purpose:
The exception type can be HDD full, HDD error, network disconnected, IP address conflicted, record/capture
exception and illegal login to the camera.
Steps:
1. Enter the Exception Settings interface:
Remote Settings > Events > Exception
2. Select a camera needs to be configured.
3. Select an exception type.
4. Check the checkbox to set the actions taken for the Exception alarm.
5. Check the check box to link the camera with alarm output.
6. Click Apply to save the setting.
Record Schedule Settings
Steps:
1. Enter the record schedule configuration interface.
2. Remote Settings > Events >Schedule
To Next Page
Loading...
