HIKVISION DS-19S08N-04F/K Series

Video Security Control Panel User Manual
--74--
Command
Command Description
A
General Arming
B
Instant Arming
C
Stay Arming
D
Disarming
E
None
{13} End the command.
Enabling Trigger Schedule
To enable the trigger schedule, please refer to the command below.
697 0 #
1 2 3
{1} Enabling Trigger Schedule Command Address: 697.
{2} It indicates to enable/disable the trigger schedule.
Command
Command Description
Command
Command Description
0
Enable
1
Disable
{3} End the command.
Trigger Schedule Trigger Parameter Settings
To configure the trigger parameters of the trigger schedule, please refer to the command below.
698 0 0 0 0 #
1 2 4 63 5
{1} Trigger Schedule Trigger Parameter Settings Command Address: 698.
{2} It indicates to delete/add the trigger schedule.