HIKVISION DS-2CD6986F-H User Manual

User Manual of PanoVu Series Network Camera
3
Network Camera
Network Cable
Switch or Router
PC
Network Cable
Figure 1-2 Connecting via an Switch or a Router
1.2.2 Activating the Camera
Purpose:
You are required to activate the camera first before you can use the camera.
Activation via web browser, activation via SADP, and activation via client software are supported. In the
following sections, activation via web browser and activation via SADP will be taken as examples. You
may refer to the user manual of the camera for details of activation via client software.
 Activation via Web Browser
Steps:
1. Power on the camera, and connect the camera to the network.
2. Input the IP address into the address bar of the web browser, and click Enter to enter the
activation interface.
Note:
The default IP address of the camera is 192.168.1.64.
Figure 1-3 Activation Interface (Web Browser)
3. Create a password and input the password into the password field.

HIKVISION DS-2CD6986F-H Specifications

General

Brand	HIKVISION
Model	DS-2CD6986F-H
Category	Security Camera
Language	English