User Manual of PanoVu Series Network Camera
5.1.2 HDD Management
If the memory card is inserted in the device or NAS (Network-Attached Storage) is added, enter
HDD Management interface to configure the storage status.
Steps:
1. Enter the HDD settings interface
Configuration > Storage > Storage Management > HDD Management,
You can view the capacity, free space, status, type and property of the disk.
Figure 5-2 Storage Management Interface
2. If the status of the disk is Uninitialized, check the corresponding checkbox to select the disk and
click Format to start initializing the disk.
When the initialization completed, the status of disk will become Normal.
Figure 5-3 View Disk Status
Define the Quota for Record and Pictures
Steps:
1. Input the quota percentage for picture and for record.
2. Click Save and refresh the browser page to activate the settings.
Figure 5-4 Quota Settings
Note:
Up to 8 NAS disks can be connected to the camera.
To Next Page
Loading...
Need help?
General
