User Manual of PanoVu Series Network Camera
2. In the address field, input the IP address of the camera, e.g., 192.168.1.64 and click Enter to enter
the login interface.
3. If you activate the camera for the first time using, refer to the Section 1.2 Activating the Camera.
4. Select English as the interface language on the top-right of login interface.
5. Input the user name and password and click .
The admin user should configure the device accounts and user/operator permissions properly.
Delete the unnecessary accounts and user/operator permissions.
Note:
The device IP address gets locked if the admin user performs 7 failed password attempts (5
attempts for the user/operator).
Figure 1-14 Login Interface
1.4.2 Accessing by Client Software
The product CD contains the client software. You can view the live video and manage the camera with
the client software.
Follow the installation prompts to install the client software and. The configuration interface and live
view interface of client software are shown below.
Figure 1-15 iVMS-4200 Control Panel
To Next Page
Loading...
Need help?
General
