HIKVISION DS-2CD6986F-H User Manual

User Manual of PanoVu Series Network Camera
71
4. Click tab to enter the arming schedule setting interface. The arming
schedule configuration is the same as the setting of the arming schedule for motion detection.
Refer to Step 5 in Section 6.1.1 Configuring Motion Detection.
5. Click tab to select the linkage method taken for the video loss alarm. Send
Email, Notify Surveillance Center, and Trigger Alarm Output are selectable. Refer to Step 6 in
Section 6.1.1 Configuring Motion Detection.
6. Click to save the settings.
6.1.3 Configuring Video Loss Alarm
Steps:
1. Enter the Video Loss setting interface:
Configuration > Event > Basic Event > Video Loss
Figure 6-8 Video Loss
2. Check the Enable checkbox to enable the video loss detection.
3. Click tab to enter the arming schedule setting interface. The arming
schedule configuration is the same as the setting of the arming schedule for motion detection.
Refer to Step 5 in Section 6.1.1 Configuring Motion Detection.
4. Click tab to select the linkage method taken for the video loss alarm. Send
Email, Notify Surveillance Center, and Trigger Alarm Output are selectable. Refer to Step 6 in
Section 6.1.1 Configuring Motion Detection.
5. Click to save the settings.

HIKVISION DS-2CD6986F-H Specifications

General

Brand	HIKVISION
Model	DS-2CD6986F-H
Category	Security Camera
Language	English