Name: HIKVISION DS-2SF8C442MXG-EL/26
Brand: HIKVISION
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Automac Alarm

Set the automac alarm parameters, then the device triggers an alarm output automacally in the

set arming schedule.

Steps

Set

automac alarm parameters.

Alarm Output No.

Select the alarm output No. according to the alarm interface connected to the external alarm

device.

Alarm Name

Custom a name for the alarm output.

Delay

It refers to the

me duraon that the alarm output remains aer an alarm occurs.

Set the alarming schedule. For the informaon about the sengs, see Set Arming Schedule .

Click Copy to… to copy the parameters to other alarm output channels.

Click Save.

Manual Alarm

You can trigger an alarm output manually.

Steps

Set the manual alarm parameters.

Alarm Output No.

Select the alarm output No. according to the alarm interface connected to the external alarm

device.

Alarm Name

Custom a name for the alarm output.

Delay

Select Manual.

Click Manual Alarm to enable manual alarm output.

Oponal: Click Clear Alarm to disable manual alarm output.

9.2.2 FTP/NAS/Memory Card Uploading

If you have enabled and congured the FTP/NAS/memory card uploading, the device sends the

alarm

informaon to the FTP server, network aached storage and memory card when an alarm is

triggered.

TandemVu PTZ Camera User Manual

Questions and Answers:

Need help?

Do you have a question about the HIKVISION DS-2SF8C442MXG-EL/26 and is the answer not in the manual?

HIKVISION DS-2SF8C442MXG-EL/26 Specifications

General