HIKVISION DS-2SF8C442MXG-EL/26 User Manual

-
Call Preset No. 32.
4.10 Set Privacy Mask
Privacy masks cover certain areas on the live image to protect personal privacy from being live
viewed and recorded.
Steps
1.
Go to
Conguraon → PTZ → Privacy Mask .
2.
Select the PTZ channel.
1) Check Enable Privacy Masks.
2) Adjust the live image to the target scene via PTZ control
buons.
3) Draw the area.
Draw Area Click Draw Area and drag the mouse in live
view image. You can drag the corners of the
red rectangle to adjust the area.
Stop Drawing Click Stop Drawing aer drawing area.
4) Click Add.
It is listed in Privacy Mask List.
5) Edit Name, Type, and
Acve Zoom Rao on your demand.
Acve Zoom Rao
When the actual zoom rao is less than the set acve zoom rao, the set area can not be
covered. When the actual zoom
rao is greater than the set acve zoom rao, the privacy
mask is valid. The maximum value of acve zoom rao depends on the camera module.
6) Click Save.
7) Repeat the steps above to set other privacy masks.
3.
Select panoramic channel.
1) Check Enable Privacy Masks.
2) Draw the area.
Draw Area
Click Draw Area and drag the mouse in live
image. You can drag the corners of the red
rectangle to adjust the area.
Stop Drawing ClickStop Drawing aer drawing area.
3) Click Add.
It will be listed in Privacy Mask List.
4) Edit Name, Type on your demand.
5) Click Save.
6) Repeat the steps above to set other privacy masks.
TandemVu PTZ Camera User Manual
51

HIKVISION DS-2SF8C442MXG-EL/26 Specifications

General

Brand	HIKVISION
Model	DS-2SF8C442MXG-EL/26
Category	Security Camera
Language	English