HIKVISION DS-2SF8C442MXG-EL/26 User Manual

Manual Person Arming The device tracks and captures the manually selected target and uploads
the related data.
Device Auto Person
Arming
The device tracks and captures targets automacally according to the
seng rule.
3.4.1 Device Auto Person Arming
You need to set face picture libraries and auto person arming rules to realize device auto person
arming.
Set Auto Person Arming Rule
Before You Start
The face picture library should be set in advance. See .
Steps
1.
Go to VCA → Set Applicaon → Person Arming → Basic Sengs .
2.
Check Enable.
3.
Set the parameters for face picture comparison and arming.
1) Set the Face Grading Threshold for
Detecon and Max. Detecon Time of Face.
Face Grading Threshold for Detecon
Every face entering the monitoring scene is graded by the device according to the quality.
When a face with its grading exceeds the set threshold, it triggers the comparison with the
pictures in the selected face picture library.
Max.
Detecon Time of Face
If the grading of a target face does not reach the set Face Grading Threshold for Detecon
during the set me, the device stops grading the target face.
2) Select a desired library, and set as the Face Picture Library.
3) Set the arming schedule and linkage method for the selected library.
Note
The arming schedule and linkage method for dierent libraries are allowed to set
independently.
4.
Click Save.
Advanced
Sengs
In advanced parameters, you can set the tracking, capture and other parameters for the person
arming.
TandemVu PTZ Camera User Manual
12

HIKVISION DS-2SF8C442MXG-EL/26 Specifications

General

Brand	HIKVISION
Model	DS-2SF8C442MXG-EL/26
Category	Security Camera
Language	English