HIKVISION DS-2SF8C442MXG-EL/26 - Traffic Data Collection; ITS Linkage and Alarm

If only Illegal Parking Detecon is enabled in a scene, the device automacally switches to
the next scene when no evidence picture capturing is triggered for the set Auto-switch
Interval.
3.5.6 Trac Data Collecon
The device collects and uploads trac data including vehicle speed, trac volume, headway me,
headway distance, me occupancy of a lane, and space occupancy of a lane.
Before You Start
Set detecon scenes and detecon areas. See Set Detecon Scene and Set Lane Area for details.
Steps
1.
Go to VCA → Intell
Trac Event → Common Sengs → Speed Dome Rule Sengs .
2.
Select Trac Data Collecon.
3.
Check Enable.
4.
Select Arm Lane.
Trac data collecon takes eect in the selected lane areas.
5.
Set Stascs Interval.
Trac volume in a lane is counted and uploaded by the stascs interval.
6.
Click Save.
What to do next
Set the arming schedule and linkage and alarm. See
Set ITS Arming Schedule and ITS Linkage and
Alarm for details.
3.5.7 ITS Linkage and Alarm
When trac events are detected, the device can perform linkage acons, for example, uploading
captured pictures and sending alarm messages.
Note
Some linkage acons may not be supported by certain device models.
Upload Pictures
Set the parameters for the device to automacally upload captured pictures to FTP server or other
plaorms.
See Upload by FTP to upload captured pictures by FTP.
See
Upload by SDK or Set ISUP to upload captured pictures to plaorms.
TandemVu PTZ Camera User Manual
34