HIKVISION DS-2SF8C442MXG-EL/26 - People Density

It represents the rao of vehicle size to live image size during tracking. The larger the coecient
is, the larger the vehicle is shown.
Uploading Picture Sengs
Go to VCA → Set Applicaon → ITS (Intelligent Transportaon System) → Advanced Sengs →
Picture to set the parameters of alarm pictures.
Picture Quality
Pictures with higher
resoluon and beer quality have more details and larger le size.
Enable OSD Overlay
The device OSD is overlaid on alarm pictures.
Display Target Info. on Alarm Picture
Check to display target informaon on alarm pictures.
License Plate Exposure
You can adjust the exposure parameters to make sure that the license plates are exposed properly
during vehicle arming.
Steps
1.
Go to VCA → Set
Applicaon → ITS (Intelligent Transportaon System) → Advanced Sengs →
License Plate Exposure .
2.
Select a channel.
3.
Check License Plate Exposure.
4.
Set exposure parameters.
Reference Brightness
Adjust the reference brightness to the value that the license plate is exposed properly.
Min.
Duraon
The minimum duraon to maintain the exposure level for the license plates when they are
detected.
Arming Schedule
Set the start
me and end me when the license plate exposure sengs are valid.
5.
Click Save.
3.6 People Density
This funcon detects the level of people density in the detecon areas.
TandemVu PTZ Camera User Manual
39