View Arming Task
Go to VCA → Intell Trac Event → Vehicle Arming → Arming Status to view the arming tasks sent
from the
plaorm.
The device performs a single task at one me. If it receives mulple tasks, former tasks are
interrupted and the device performs the latest task.
3.5.9 Advanced Sengs
You can set the advanced sengs according to your need to get beer vehicle arming eect.
Advanced Parameters
Go to Conguraon → Vehicle Arming → Advanced Conguraon → Advance Parameters to set
the following parameters.
License Plate Thumbnail
If the device recognizes a license plate, an
addional thumbnail of the license plate is uploaded.
Tuning Mode
The tuning mode is for professional technicians. It is not recommended to other users as it may
aect the live view image.
Capture No Plate Vehicle
When this funcon is enabled, the device captures and uploads vehicle pictures with or without
license plate. If it is not enabled, only pictures of vehicles with license plate are uploaded.
Dwell Time
aer Failed Tracking
The me the device stays at the posion where the target tracking fails.
Report Interval of Tracking Info
The alarming informaon upload interval during tracking.
Wait to Stop Tracking If Low Validity
The validity is an internal parameter that helps judge whether the device should keep tracking
or not. This parameter is the waing me level before the device stops tracking when the
validity is low. Larger value means longer
waing me.
Wait to Lower Tracking Speed If Low Validity
The validity is an internal parameter that helps judge whether the PTZ channel should lower the
tracking speed or not. This parameter is the waing me level before the device lowers the
tracking speed when the validity is low. Larger value means longer
waing me.
Self-adapve Rao Coecient
TandemVu PTZ Camera User Manual
38
To Next Page
Loading...
Need help?
General
