HIKVISION DS-2SF8C442MXG-EL/26 - Conduct Regional Focus; Conduct Regional Exposure; Light; Lens Initialization

5.1.8 Conduct Regional Focus
You can enable the funcon to focus on certain area.
Steps
1.
Click to enable regional focus.
2.
Drag the mouse on the live view to draw a rectangle as the desired focus area.
3.
Click
to disable this funcon.
5.1.9 Conduct Regional Exposure
When the brightness of live view is not balanced, you can enable this funcon to opmize the
exposure of the selected image region.
Steps
1.
Click
to enable regional exposure.
2.
Drag the mouse on the live view to draw a rectangle as the desired exposure area.
3.
Click to disable this funcon.
5.1.10 Light
Click to turn on or turn o the illuminator.
5.1.11 Lens
Inializaon
Lens inializaon is used on the device equipped with motorized lens. The funcon can reset lens
when long
me zoom or focus results in blurred image. This funcon varies according to dierent
models.
Click
to operate lens inializaon.
5.1.12 Track Manually
In live view, manually select a target for the device to track.
Steps
1.
Click on the toolbar of the live view page.
2.
Click a moving object in the live image.
The camera tracks the target and keep it in the center of live view image.
TandemVu PTZ Camera User Manual
60