Name: HIKVISION DS-2SF8C442MXG-EL/26
Brand: HIKVISION
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Steps

Check Enable Log Upload Server.

Oponal: Check Enable Encrypted Transmission if you want the log data to be encrypted.

Input Log Server IP and Log Server Port.

Oponal: Select client cercate.

Select CA cercate to the device.

Click Test to test the sengs.

Click Save.

11.13.6 Set QoS

QoS (Quality of Service) can help improve the network delay and network congeson by seng

the priority of data sending.

Note

QoS needs support from network device such as router and switch.

Steps

Go to Conguraon → Network → Advanced Conguraon → QoS .

Set Video/Audio DSCP, Alarm DSCP and Management DSCP.

Note

Network can idenfy the priority of data transmission. The bigger the DSCP value is, the higher

the priority is. You need to set the same value in router while conguraon.

Click Save.

11.13.7 Set IEEE 802.1X

You can authencate user permission of the connected device by seng IEEE 802.1X.

Go to Conguraon → Network → Advanced Sengs → 802.1X , and enable the funcon.

Select protocol and version according to router informaon. User name and password of server are

required.

Note

●

If you set the Protocol to EAP-TLS, select the Client Cercate and CA Cercate.

●

If the funcon is abnormal, check if the selected cercate is abnormal in Cercate

Management.

TandemVu PTZ Camera User Manual

123

Questions and Answers:

Need help?

Do you have a question about the HIKVISION DS-2SF8C442MXG-EL/26 and is the answer not in the manual?

HIKVISION DS-2SF8C442MXG-EL/26 Specifications

General