The device captures the target picture once the score of the captured face exceeds the Quick
Shot Threshold during the Max. Capture Interval. Otherwise, the device selects and uploads
the picture with the highest score during the Max. Capture Interval.
Quick Shot Threshold
It refers to the quality of face to trigger quick shot.
Max. Capture Interval
It describes the max.
me occupaon for one quick shot.
Capture Times
It refers to the capture mes a face will be captured during its stay in the congured area. The
device captures the target face according to the set mes.
Face Exposure
Enable the funcon, and the device automacally adjusts exposure level when human faces
appear in the scene.
Reference Brightness
It refers to the reference brightness of a face in the face exposure mode. If a face in the actual
scene is brighter than the set reference brightness, the device lowers the exposure level. If a
face in the actual scene is darker than the set reference, the device increases the exposure
level.
Minimum
Duraon
The extra me the device keeps the face exposure level aer the face disappears in the scene.
Face Filtering Time
It means the me interval between the camera detecng a face and taking a capture acon. If
the detected face stays in the scene for less than the set ltering me, capture will not be
triggered. For example, if the face
ltering me is set as 5 seconds, the camera will capture the
detected face when the face keeps staying in the scene for 5 seconds.
Data Upload
Check one or more desired target types for picture uploading.
3.5 Intelligent
Trac Event (ITS)
The device detects vehicles, trac violaons, and trac accidents, captures evidence pictures, and
collects trac data. You can set the rules for detecon, alarm messages, and data uploading.
3.5.1 Basic
Sengs
You can set the basic informaon, listening server, and ANR.
TandemVu PTZ Camera User Manual
17
To Next Page
Loading...
Need help?
General
