Note
To display the overlaid informaon, make sure that Display POS Informaon in Conguraon →
Local → Live View Parameters has been enabled.
3.7 Smart Display
This funcon displays real me pictures captured by smart funcons and analyzes the target in real
me.
Note
To use this funcon, your web browser version should be above IE11.0.9600.17843.
Live View Parameter
Icon Funcon
Start or stop live view.
For devices with mulple channels, you can choose a way to display the images.
For devices with mulple channels, you can choose one or more channels for live
view.
Capture a picture.
Start or stop recording.
Adjust the volume of live view. Move the slider to right to turn up the volume and
le to turn down the volume. Move to the le end to mute the live view.
Download Display Pictures
Click and the device stores captured pictures to the browser cache. Hover the pointer over the
icon to see the number of pictures in the cache. Click again to download the pictures in a
package.
Note
The browser cache has a limited size. The recommended number of pictures to download is no
more than 200.
Layout
Click and choose Layout. Check the display content you need to add it to the smart display
page. When real-me analyze is selected, you can choose the contents you want to display.
TandemVu PTZ Camera User Manual
42
To Next Page
Loading...
Need help?
General
