HIKVISION DS-2SF8C442MXG-EL/26 - Chapter 3 Smart Function; Allocate VCA Resource; Set Camera Info; Capture Target with Feature

Chapter 3 Smart Funcon
3.1 Allocate VCA Resource
VCA resource oers you opons to enable certain VCA funcons according to actual needs. It helps
allocate more resources to the desired funcons.
Steps
1.
Go to VCA → VCA Resource .
2.
Select desired VCA
funcons.
3.
Save the sengs.
Note
Certain VCA funcons are mutually exclusive. When a certain funcon or funcons are selected
and saved, others will be hidden.
3.2 Set Camera Info
Customize specic informaon for the device. It may help idenfy a certain device when mulple
devices are under management.
Go to VCA → General VCA Resource to set Camera No. and Camera Info.
3.3 Capture Target with Feature
It is to detect, capture and upload features of targets in mulple types, such as human face and
human body.
3.3.1 Set
Detecon Rule
Aer the rules and algorithm parameters are set, the device captures targets of mulple types and
triggers linkage
acons automacally.
Steps
1.
Go to VCA → Face+Human → Rule .
2.
Check Enable.
3.
Select a
conguraon mode.
Normal
One detecon scene is allowed to set. The device captures targets in the scene in
the set arming schedule.
See for details.
TandemVu PTZ Camera User Manual
8