HIKVISION DS-2SF8C442MXG-EL/26 - Vehicle Arming

Note
If a list of license plates exists, the exisng list is exported.
3.
Fill in the list.
4.
Click Browse to import the list.
The list shows on the web page.
5.
Select a mode according to your need.
Normal Mode No vehicle is armed.
Allowlist Mode Vehicles NOT on the list are armed.
Blocklist Mode Only the vehicles on the list are armed.
6.
Click Save.
Set Alarm Output Linkage
The device sends alarm signals to the connected alarm output devices when an alarm is triggered.
Before You Start
The device is connected to alarm output devices.
Steps
1.
Go to VCA → Intell Trac Event → Advanced Conguraon → Alarm Output Linkage .
2.
Select alarm output channels for each type of alarms.
3.
Click Save.
What to do next
See
Trigger Alarm Output for detailed alarm output sengs.
3.5.8 Vehicle Arming
The device detects and tracks designated license plates, and uploads real-me target locaon and
other related informaon.
Note
●
Select ITS (Intelligent Transportaon System) on VCA Resource page to show the conguraon
page.
●
Target locaon informaon can be uploaded only when the GPS calibraon is completed. See
GPS Calibraon for conguraon instrucons.
●
This
funcon is only supported by certain device models.
Manual vehicle arming and plaorm-controlled vehicle arming are supported, and manual vehicle
arming has a higher priority.
TandemVu PTZ Camera User Manual
36