HIKVISION DS-7608NI-L1/W

4. Set the connuous main stream/sub-stream recording parameters for the camera. Refer to
Congure Recording Parameter for details.
5. Go to Conguraon → Record → Schedule .
6. Select recording type as Event. Refer to
Edit Schedule for details.
Edit Schedule
Steps
1. Go to Conguraon → Record → Schedule .
Figure 5-18 Recording Schedule
Connuous
Connuous recording.
Event
Recording is triggered by events.
2. Select a camera in Camera No.
3. Turn on Enable.
4.
Congure the recording schedule.
Edit
Schedule
a. Click Edit.
b. Select a day to congure in Weekday.
c. To set an all-day recording schedule, check All Day and select schedule type.
d. To set other schedules, uncheck All Day, and set Start/End Time and
schedule type.
Note
Up to 8 periods can be congured for each day. And the me periods cannot
be overlapped with each other.
e. Click OK to save the sengs and go back to upper level menu.
Draw
Schedule
a. Click to select schedule type as Connuous or Event.
b. On the table, drag the mouse on the desired period to draw a colored bar.
5. Click Apply.
Network Video Recorder User Manual
37