To Next Page

To Previous Page

Enable or disable the live face detecon funcon. If enabling the funcon, the device can

recognize whether the person is a live one or not.

Note

Biometric recognion products are not 100% applicable to an-spoong environments. If you

require a higher security level, use mulple authencaon modes.

Live Face

Detecon Security Level

Aer enabling the face an-spoong funcon, you can set the matching security level when

performing live face

authencaon.

Recognion Distance

Select the distance between the authencang user and the device camera.

Applicaon Mode

Select either others or indoor according to actual environment.

Connuous Face Recognion Interval

Set the me interval between two connuous face recognions when authencang.

Pitch Angle

The maximum pitch angle when starng face authencaon.

Yaw Angle

The maximum yaw angle when starng face authencaon.

1:1 Matching Threshold

Set the matching threshold when

authencang via 1:1 matching mode. The larger the value,

the smaller the false accept rate and the larger the false rejecon rate.

1:N Matching Threshold

Set the matching threshold when authencang via 1:N matching mode. The larger the value,

the smaller the false accept rate and the larger the false

rejecon rate.

ECO Mode

Aer enabling the ECO mode, the device will use the IR camera to authencate faces in the low

light or dark environment. And you can set the ECO mode threshold, ECO mode (1:N), and ECO

mode (1:1).

ECO Mode (1:1)

Set the matching threshold when

authencang via ECO mode 1:1 matching mode. The larger

the value, the smaller the false accept rate and the larger the false rejecon rate.

ECO Mode (1:N)

Set the matching threshold when authencang via ECO mode 1:N matching mode. The larger

the value, the smaller the false accept rate and the larger the false rejecon rate

DS-K1T341B Series Face Recognion Terminal User Manual

HIKVISION DS-K1T341B Series User Manual

Questions and Answers: