HIKVISION DS-K1T500S - 8 Ivms-4200 Control Client Operation; Importing Access Control Device; Live View and Playcak Settings

Video Access Control Terminal User Manual
102
8 iVMS-4200 Control Client Operation
8.1 Importing Access Control Device
Before you start:
 Make sure iVMS-4200 Control Client is installed on your local PC.
 Make sure iVMS-4200 Access Control Client has added Video Access Control Terminal.
 Make sure iVMS-4200 Access Control Client is running.
Steps:
1. In the iVMS-4200 Control Client control panel, click System -> Import from Access Control Client.
2. Input the iVMS-4200 Access Control Client login user name and password in the pop-up window.
3. Click Start Synchronization.
All devices in the iVMS-4200 Access Control Client will import to this client.
8.2 Live View and Playcak Settings
Purpose:
The parameters for live view and playback, including picture format, pre-play duration, etc., can be set.
Steps:
1. Open the System Configuration page.
2. Click the Live View and Playback tab to enter the Live View and Playback Parameter Settings interface.
3. Configure the live view and playback parameters. For details, see Table 8-1 Live View and Playback
Parameters.
4. Click Save to save the settings.