Video Access Control Terminal User Manual
107
You can also select the camera on the Group Management interface, and then click Delete to remove the
camera from the group.
3. Select the group from the group list on the Import Encoding Channel page, move the mouse to the group
and click and you can remove all the cameras from the group.
8.3.5 Deleting the Group
Steps:
1. Select the group in the Group Management interface.
2. Click Delete Group, or move the mouse to the group and click the icon . The selected group and the
resource under it will be deleted.
8.4 Live View
Purpose:
For the surveillance task, you can view the live video of the added network cameras, video encoders and video
intercom device on the Main View page. And some basic operations are supported, including picture capturing,
manual recording, PTZ control, etc.
Before you start:
A camera group is required to be defined for live view.
You can set the rotate type if necessary in the Group Management. For details, refer to Modifying the
Group/Camera of Chapter 8.3 Group Management.
Click the icon on the control panel,
or click View->Main View to open the Main View page.
Main View Page
1 View List
2 Camera List
3 PTZ Control Panel
4 Display Window of Live View
5 Live View Toolbar
Camera Status:
To Next Page
Loading...
