Video Access Control Terminal User Manual
104
this way, you can directly zoom in or out (or restore) the live video by
scrolling the mouse.
Skip Unconcerned
Video during VCA
Playback
Enable to skip the unconcerned video during VCA playback and the
unconcerned video won’t be played during VCA playback.
8.3 Group Management
Purpose:
The devices added should be organized into groups for a convenient management. You can get the live view, play
back the video files, and do some other operations of the device through the group.
Before you start:
Devices need to be added to the client software for group management.
Perform the following steps to enter the Group Management interface:
1. Open the Device Management page.
2. Click the Group tab to enter the Group Management interface.
8.3.1 Adding the Group
Steps:
1. Click to open the Add Group dialog box.
2. Input a group name as you want.
3. Click OK to add the new group to the group list.
You can also check the checkbox Create Group by Device Name to create the new group by the name of the
selected device.
To Next Page
Loading...
