HIKVISION DS-K1T500S - DIP Switch Introduction

Video Access Control Terminal User Manual
131
9.2 DIP Switch Introduction
Figure 9-1 DIP Switch Module
Table 9-1 Description of DIP Switch
Icon
Description
Represent 1 in binary mode
Represent 0 in binary mode
For example, binary value of the following status is: 0000 1100.
Figure 9-2 DIP Switch Module
Table 9-2 Description of DIP Switch
No.
Description
DIP Switch Status
1 ~ 4
Address of RS-485
2: Security Module
0: Card Reader
5
RS-485 Direction under the Terminal Mode
1: Upstream;
0: Down Stream
6
Working Method
1: Card Reader;
0: Terminal.
7
Wiegand Protocol
(available when No. 6 is 1)
1: Wiegand protocol of 26-bit;
0: Wiegand protocol of 34-bit.
8
Matched Resistance
(available for RS-485 protocol)
1: Enable;
0: Disable.