Video Access Control Terminal User Manual
17
7 iVMS-4200 Access Control Client Operation
7.1 Overview of iVMS-4200 Client Software
7.1.1 Description
The iVMS-4200 Access Control Client is a client-based access control system for management of access control
devices. With intuitive and easy-to-use operations, it provides multiple functionalities, including access control
device management, person/card management, permission configuration, door status management, attendance
management, event search, etc.
This user manual describes the function, configuration and operation steps of iVMS-4200 Access Control Client.
To ensure the properness of usage and stability of the client, please refer to the contents below and read the
manual carefully before installation and operation.
7.1.2 Running Environment
Operating System: Microsoft Windows 7/Windows 2008 R2/Windows 8.1/Windows 10 (32-bit or 64-bit), Windows
XP SP3 (32-bit)
CPU: Intel Pentium IV 3.0 GHz or above
Memory: 2G or above
Video Card: RADEON X700 Series or above
GPU: 256 MB or above
For high stability and good performance, these above system requirements must be met.
The software does not support 64-bit operating system; the above mentioned 64-bit operating system refers
to the system which supports 32-bit applications as well.
7.1.3 Client Performance
The client performance is shown as follows:
Up to 16 user accounts (including super user) supported
Up to 16 access control devices supported
Up to 64 access control points (doors) supported
Up to 2,000 persons supported
Up to 2,000 cards supported
Up to 10 levels of departments supported
7.2 User Registration and Login
For the first time using the client software, you need to register a super user to login.
7.2.1 User Registration
Steps:
1. Double-click on the desktop to run the client.
To Next Page
Loading...
