HIKVISION DS-K1T500S - Event and Alarm Management; Real-Time Access Control Event and Alarm

Video Access Control Terminal User Manual
92
7.5 Event and Alarm Management
Purpose:
In this section, you are able to check the real-time events and alarms, and view the event report of the access
control point.
7.5.1 Real-Time Access Control Event and Alarm
Purpose:
You can view the real-time alarm and event information received by the client.
Before you start:
Before you can receive the alarm information from the device, you need to click Tool -> Arming Settings and arm
the device by checking the corresponding checkbox.
Note: The device will be armed by default after being added to the client.
After enabling the arming control of the access control device, the client can receive the alarms and events once
triggered.
Click the icon in Alarms and Events Toolbar to show the Alarms and Events panel. Or click to display the
Alarm Event interface.