Video Access Control Terminal User Manual
91
All the cards and persons which have been applied to the device will be displayed.
2. Click the Authentication Password field of the card and input the authentication password for the card.
Note: The authentication password should contain 4 to 8 digits.
3. After setting the authentication password, the authentication password function of the card will be enabled
by default.
You can click Disable to disable the card’s authentication password.
You can also click Enable to enable it again.
4. (Optional) You can input the keywords of card No., person name, or authentication password to search.
You can also set the condition to filter the cards which have enabled the authentication password function
and the cards which haven’t.
Note: Up to 500 cards with authentication password can be added to one access control device. The password
should be unique and cannot be same with each other.
To Next Page
Loading...
