Video Access Control Terminal User Manual
46
2. Set the picture size and quality.
Set the linked capture times once triggered
Set the capture interval according to the capture times.
3. Click Save to save the settings.
Manual Capture
Steps:
1. Select the Manual Capture tab.
2. Select the resolution of the captured pictures from the dropdown list.
Note: The supported resolution types are CIF, QCIF, 4CIF/D1, SVGA, HD720P, VGA, WD1, and AUTO.
3. Select the picture quality as Best, Better, or Normal.
4. Click Save to save the settings.
5. You can click Restore Default Value to restore the parameters to default settings.
7.3.4 RS-485 Settings
Purpose:
To Next Page
Loading...
