HIKVISION DS-K1T500S - Instant Playback

Video Access Control Terminal User Manual
114
1. Move the mouse pointer to the display window in live view to show the toolbar.
2. Click the icon in the toolbar of the display window or on the right-click Live View Management Menu.
A small window of the captured picture will be displayed to notify whether the capturing operation is done
or not.
Note: The saving path of the captured pictures can be set on the System Configuration interface. For details, see
Section 14.2.3 File Saving Path Settings.
Viewing Captured Pictures
The pictures captured in live view are stored in the PC running the software. You can view the captured pictures
if needed.
Steps:
1. Click File->Open Image File to open the Captured Images page.
2. Select the camera to be searched from the Camera Group list.
3. Click the icon to specify the start time and end time for the search.
4. Click Search. The pictures captured between the start time and end time will be displayed.
5. Double-click the captured picture to enlarge it for a better view.
Select the captured picture, and click Print. You can print the selected picture.
Select the captured picture, and click Delete. You can delete the selected picture.
Select the captured picture, and click Send Email. You can send an Email notification with the selected
picture attached.
Select the captured picture, and click Save as. You can save a new copy of the selected picture.
8.4.3 Instant Playback
Purpose:
The video files can be played back instantly on the Main View page. Instant playback shows a piece of the video
which was remarkable, or which was unclear on the first sight. Thus, you can get an immediate review if needed.
Before you start:
The video files need to be recorded on the storage devices, such as the SD/SDHC cards and HDDs on the DVRs,
NVRs, Network Cameras, etc., or on the storage servers.
Steps:
1. Start the live view and move the mouse to the display window to show the toolbar. You can also move the
mouse to default view or custom view and click to enable the instant playback of the selected view.
2. Click the icon in the toolbar and a list of time periods pops up.
30s, 1 min, 3 min, 5 min, 8 min, and 10 min are selectable.