Video Access Control Terminal User Manual
117
6. Click Save to confirm the settings. Click to back to the Main View page. Then you can click and
select the custom window division for playing live video.
Notes:
You can also enter the Remote Playback page and perform the steps above to configure the custom
window division.
For remote playback, up to 16 windows can be played back at the same time. The custom window
division with more than 16 windows is invalid for playback.
8.4.5 Other Functions in Live View
There are some other functions supported in the live view, including digital zoom, two-way audio, camera status
and synchronization.
Auxiliary Screen Preview
The live video can be displayed on different auxiliary screens for the convenient preview of multiple monitoring
scenes. Up to 3 auxiliary screens are supported.
Channel-zero
For the channel-zero of the device, you can hold the Ctrl key and double-click to display the specific channel.
Hold the Ctrl key and double-click again to restore.
Two-way Audio
Two-way audio function enables the voice talk of the camera. You can get not only the live video but also the
real-time audio from the camera. If the device has multiple two-way audio channels, you can select the channel
to start two-way audio.
The two-way audio can be used for only one camera at one time.
Camera Status
The camera status, such as recording status, signal status, connection number, etc., can be detected and
displayed for check. The status information refreshes every 10 seconds.
Synchronization
The synchronization function provides a way to synchronize the device clock with the PC which runs the client
software.
To Next Page
Loading...
