HIKVISION DS-K1T500S - Permission Configuration; Person Management

Video Access Control Terminal User Manual
50
7.4 Permission Configuration
You can add the department and person to the client for management, and add card for access control. You can
set the schedule template and configure the access control permission via the client.
7.4.1 Person Management
Click icon on the control panel to enter the Person Management interface.
You can add, edit, and delete the department and person in Person Management module.
The interface is divided into two parts: Department Management and Person Management.
 Department Management
You can add, edit, or delete the department as desired.
 Person Management
After adding the department, you can add the person to the department for further management.
Department Management
Adding Department
Steps:
1. In the department list on the left, the Default Department already exists in the client as the parent
department of all departments.
2. Select the upper department and click Add Department button to pop up the adding department interface
to add the lower department.