Video Access Control Terminal User Manual
106
Refresh the latest information of added cameras.
Create a group named as device name-Encoding Channel
(Alarm Input) and import the device to group.
Collapse/Expand the thumbnails of cameras.
8.3.3 Editing the Group/Camera
Steps:
1. Select the group/camera from the group list on the Import page.
Move the mouse to the camera/group and click , or double-click the group/camera name to open Modify
Group/Camera dialog box.
2. Edit the group/camera information, including the group/camera name, the stream type, etc.
Video Stream: Select the stream for the live view or playback of the camera as desired.
Rotate Type: Select the rotate type for the live view or playback of the camera as desired.
Protocol Type: Select the transmission protocol for the camera.
Stream Media Server: Configure to get stream of the camera via stream media server. You can select and
manage the available stream media server.
Copy to…: Copy the configured parameters to other camera(s).
Refresh: Get a new captured picture for the live view of the camera.
Note: For video stream and protocol type, the new settings will take effect after you reopen the live view of
the camera.
3. Click OK to save the new settings.
You can also double click the encoding channel on the Resource list in the Group Management interface after
encoding channels encoded, or select the encoding channel and click to open the Modify Camera
dialog box.
Notes:
For the IP channel of NVR which supports decoding function:
After decoding and displaying on video wall, there will be a new channel in the Encoding Channel Resources
list whose protocol type is decoding on video wall.
After closing the corresponding roaming window, the new channel will be removed from the Encoding
Channel Resources list.
8.3.4 Removing Cameras from the Group
Steps:
1. Select the camera from the group list on the Import Encoding Channel page.
2. Move the mouse to the camera and click to remove the camera from the group.
To Next Page
Loading...
