Video Access Control Terminal User Manual
3
1 Overview
1.1 Introduction
DS-K1T500S/SF is a series video access control terminal with multiple advanced technologies including fingerprint
recognition, face detection, Wi-Fi, smart card recognition, and HD camera (2 MP optional). It is equipped with
fingerprint recognition module (supporting 1:1 mode and 1:N mode), and supports offline operation.
1.2 Main Features
Doorbell ringtone settings function
Stand-alone settings for the terminal
Transmission modes of wired network (TCP/TP), Wi-Fi, RS-485, and Wiegand
Face detection and picture capturing function implemented by built-in camera (2 MP optional)
Supports RS-485 communication for connecting external card reader
Supports working as a card reader, and supports Wiegand interface and RS-485 interface for accessing the
controller
Supports EHome
Max. 50,000 cards Max. 200,000 access control events records, and Max.3000 fingerprints storage(Only
supported by DS-K1T500SF )
Adopts fingerprint module, supporting 1:N mode (fingerprint, card + fingerprint) and 1:1 mode (card +
fingerprint)
Supports multiple authentication modes including card, fingerprint, card + fingerprint, card + password,
fingerprint + password, card + fingerprint + password, and so on.(The fingerprint authentication mode is
only supported by DS-K1T500SF)
Supports Mifare card/ QR Code reading
Tampering detection, unlocking overtime alarm, invalid card swiping over times alarm, duress card alarm,
and so on
Supports security door control unit connection
Protection level: IP65
Data can be permanently saved after power-off
To Next Page
Loading...
