Video Access Control Terminal User Manual
95
7.6 System Maintenance
7.6.1 Log Management
Purpose:
The log files of the Access Control Client and the devices that connected to the Access Control Client can be
searched for checking.
Click icon on the control panel to open the Log Search page.
Searching Configuration Logs
Purpose:
The operation logs via the Access Control Client can be searched by time.
Steps:
1. Open the Log Search page.
2. Select the radio button of Configuration Logs.
3. Select the Operation Type of log files. For cofiguration log, the operation type includes department
management, card managemene, access control permission configuration, ect..
4. Click to specify the start time and end time.
5. Click Search. The matched log files will display on the right.
You can check the operation time, log type and other information of the logs.
6. You can click Export to export the search result to the local PC.
Note: Please narrow the search condition if there are too many log files.
Searching Control Logs
Purpose:
The logs of controlling access control point via the client can be searched by time.
Steps:
1. Open the Log Search page.
To Next Page
Loading...
