Video Access Control Terminal User Manual
93
You can view real-time access event (such as swiping to open the door, unrecognized card number, duration
group error, etc.) information and other operation events in Alarm Event interface.
Note: If you cannot receive the event and alarm information of the access control device, you can check the
arming status of the device in Tool -> Arming Settings.
You can click the card swiping event to view the card holder information.
You can click to view the captured alarm pictures if the storage server is configured. For configuring the storage
server, please refer to 8.4.4 Storage Server Configuration.
7.5.2 Event Management
Purpose:
You can search historical access event according to the search conditions (such as event type, name of the person,
card No. or start/end time).
Click icon on the control panel to enter the interface.
To Next Page
Loading...
