Video Access Control Terminal User Manual
18
2. Input the super user name, password and confirm password in the pop-up window.
3. Optionally, check the checkbox Auto-login to log in to the software automatically.
4. Click Register. Then, you can log in to the software as the super user.
A user name cannot contain any of the following characters: / \ : * ? “ < > |. And the length of the
password cannot be less than 8 characters.
For your privacy, we strongly recommend changing the password to something of your own choosing
(using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of the installer
and/or end-user.
When opening iVMS-4200 Access Control Client after registration, you can log in to the client software with the
registered user name and password.
7.2.2 Login
Steps:
1. Input the user name and password you registered.
2. Optionally, check the checkbox Auto-login to log in to the software automatically.
3. Optionally, if you forget your password, please click Forgot Password and remember the encrypted string in
the pop-up window. Contact your dealer and send the encrypted string to him to reset your password.
4. Click Login.
7.2.3 Function Modules
After login, the control panel of the Access Control Client is shown as follows:
To Next Page
Loading...
