Video Access Control Terminal User Manual
105
8.3.2 Importing Encoding Device to Group
Steps:
1. Click Import on Group Management interface, and then click the Encoding Channel tab to open the Import
Encoding Channel page.
You can also select Alarm Input tab and import the alarm inputs to the group.
You can also select Access Control tab and import the access control device to the group.
2. Select the thumbnails/names of the cameras in the thumbnail/list view.
3. Select a group from the group list.
4. Click Import to import the selected cameras to the group.
You can also click Import All to import all the cameras to a selected group.
Notes:
You can also click the icon on the Import Encoding Channel page to add a new group.
Up to 256 cameras can be added to one group.
The following buttons are available on the Import Encoding Channel page:
View the camera in list view.
View the camera in thumbnail view.
To Next Page
Loading...
