Video Access Control Terminal User Manual
49
Note: All the access control points in the group will be deleted.
Access Control Point (Door) Management
After adding the group, you can import the access control point of the added access control device to the group.
Importing Access Control Point
Steps:
1. Select the added group, and click Import button to pop up the access control point importing interface as
follows.
2. Select the access control point to import from the access control point list on the left.
3. Select an added group to import the access control point on the right.
4. Click Import button to import the selected access control points or you can click Import All to import all the
available access control points to the selected group.
5. (Optional) You can click button on the upper-right corner of the window to create a new group.
Move the mouse to the added group or access control point and click or to edit or delete it.
Note: Up to 64 access control points can be imported to the door group.
Editing Access Control Point
Steps:
1. Check the checkbox to select the imported access control point in the list and click Edit button to edit the
access control point.
2. You can edit the access control point name and the position.
3. You can view the card reader under the selected access control point.
4. Click OK to save the settings.
Deleting Access Control Point
Check the checkbox to select the imported access control point and click Delete button to delete the selected
access control point.
To Next Page
Loading...
