HIKVISION DS-K1T500S - Page 94

Video Access Control Terminal User Manual
90
12. Click Save button to save parameters.
13. You can select the added white list and click Delete button to delete it.
14. Click Apply Settings button to take effect of the new settings.
Notes:
 Up to 8 white lists can be added for one access control device.
 The mobile can control the door and the zones by sending SMS control instructions. The SMS control
instruction is composed of Command, Operation Range, and Operation Object.
Instruction
Content
Digit
Description
Format
Command
3
010-Open, 011-Closed, 020-Remain open,
021-Remain Closed, 120-Disarm, 121-Arm
Operation Range
1
1-all objects with permission, 2-single
operation
Command#1#
Operation Object
3
Starts from 1 (corresponding to different
doors or arming regions according to
commands)
Command#2#Operation
Object#
Authentication Password
Purpose:
You can open the door by inputting the authentication password on the card reader keypad after finishing the
operation of setting authentication password.
Notes:
 This authentication password function is only valid during the schedules when the card reader
authentication mode for the access control device is set as Card or Authentication Password. For details,
please refer to 4.7.2 Card Reader Authentication.
 This function should be supported by the access control device.
Steps:
1. Click Authentication Password tab and select an access control device from the list.