HIKVISION DS-K1T500S - Page 113

Video Access Control Terminal User Manual
109
The following buttons are available on the right-click Live View Management Menu:
Stop Live View
Stop the live view in the display window.
Capture
Capture the picture in the live view process.
Print Captured Picture
Capture the current picture and then print the picture.
Send Email
Capture the current picture and then send an Email notification to one or
more receivers. The captured picture can be attached.
Start/Stop Recording
Start/Stop the manual recording. The video file is stored in the PC.
Open PTZ Control
Enable PTZ control function on the display window. Click again to disable
the function.
Enable Auto-tracking
Enable the auto-tracking function of the speed dome. Then the speed
dome will track the object appearing on the video automatically. This
button is only available for the speed dome that supports the
auto-tracking function.
Open Digital Zoom
Enable the digital zoom function. Click again to disable the function.
Switch to Instant
Playback
Switch to instant playback mode.
Start/Stop Two-way
Audio
Click to start/stop the two-way audio with the device in live view.
Start/Stop IP Two-way
Audio
Click to start/stop the two-way audio with the camera in live view. This
button is only available for the camera that supports the IP two-way audio
function.
Enable/Disable Audio
Click to enable/disable the audio in live view.
Camera Status
Display the status of the camera in live view, including the recording
status, signal status, connection number, etc.
Remote Configuration
Open the remote configuration page of the camera in live view.
VCA Configuration
Enter the VCA configuration interface of the device if it is VCA device.
Synchronization
Sync the camera in live view with the PC running the client software.
Batch Time Sync
Set time synchronization for devices in batch.
Fisheye Expansion
Enter the fisheye expansion mode. Only available when the device is
fisheye camera.