Video Access Control Terminal User Manual
121
Remote Playback Page
1 Camera List
2 Display Window of Playback
3 Playback Control Buttons
4 Timeline
5 Calendars
6 Search Condition
Switching Video Stream for Playback
Purpose:
Optionally, you can switch between main stream and sub-stream for playback.
Before you start:
Set the video stream for recording as Dual-Stream.
Note: This function should be support by the device.
Steps:
1. Enter Group Management interface and open the Modify Camera dialog (refer to Editing the Group/Camera
of Chapter 8.3 Group Management).
2. Set the video stream of the camera to main stream or sub-stream.
Searching Video Files for Normal Playback
Steps:
1. Open the Remote Playback page.
2. Click the calendars icon to activate the calendars dialog.
Select the start and end date and set the accurate time.
Click OK to save the searching period.
3. Click-and-drag the camera or group to the display window,
or double-click the camera or group to start the playback.
4. The found video files of the selected group or camera will be displayed on the right of the interface in
chronological order. You can filter the results through the Filter text field.
The first video file will be played back automatically by default.
Notes:
Up to 16 cameras can be searched simultaneously.
To Next Page
Loading...
